Category Archives: Tricks

Tutorial : Hack WPA2 Wifi Through Linux Kali In 5 Simple Steps | Can Be Hacked With Virtual Box


Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) are two security protocols and security certification programs developed by the Wi-Fi Alliance to secure wireless computer networks. The Alliance defined these in response to serious weaknesses researchers had found in the previous system, WEP (Wired Equivalent Privacy).

A flaw in a feature added to Wi-Fi, called Wi-Fi Protected Setup (WPS), allows WPA and WPA2 security to be bypassed and effectively broken in many situations. Many access point they have a Wifi Protected Setup enabled by default (even after we hard reset the access point).

Requirements :

  1. Wireless card (support promiscuous mode) – In this tutorial I use ALFA AWUS036H from Amazon.inA flaw in a feature added to Wi-Fi, called Wi-Fi Protected Setup (WPS), allows WPA and WPA2 security to be bypassed and effectively broken in many situations. Many access point they have a Wifi Protected Setup enabled by default (even after we hard reset the access point).
  2. Access point with WPA2 and WPS enables.
  3. A linux Kali OS Installed in your PC. If you don’t have it download it now : http://abhi2you.blogspot.com/2014/10/download-kali-linux-operating-system-32.html
    Don’t know how to install it??? Visit this link –
    http://abhi2you.blogspot.com/2014/10/tutorial-how-to-dual-boot-kali-linux.html
    Want to use Virtual Box – Download it Now : Click here

Steps to Crack WPA2 Password With Linux Kali :

  1. Open Linux terminal (CTRL+ALT+T) and type airmon-ng


  2. The next step we need to stop our wireless monitor mode by running airmon-ng stop wlan0 .


  3. Now we ready to capture the wireless traffic around us. By running airodump-ng wlan0 our wireless interface will start capturing the data.

    From the picture above, we can see many available access point with all the information. In the green box is our victim access point which is my own access point :-)

    Information:
    BSSID (Basic Service Set Identification): the MAC address of access point
    PWR: Signal level reported by the card.
    MB: Maximum speed supported by the AP. If MB = 11, it’s 802.11b, if MB = 22 it’s 802.11b+ and higher rates are 802.11g.
    ENC: Encryption algorithm in use.
    CIPHER: The cipher detected. TKIP is typically used with WPA and CCMP is typically used with WPA2.
    Beacons: Number of announcements packets sent by the AP
    #Data: Number of captured data packets (if WEP, unique IV count), including data broadcast packets.
    #/s: Number of data packets per second measure over the last 10 seconds.
    CH: Channel number (taken from beacon packets).
    AUTH: The authentication protocol used.
    ESSID: Shows the wireless network name. The so-called “SSID”, which can be empty if SSID hiding is activated.

  4. From the step 3 above, we can find access point with encryption algorithm WPA2 and note the AP channel number. Now we will find out whether target AP has WPS enabled or not.
    wash -i wlan0 -c 8 -C -s

    If the WPS Locked status is No, then we ready to crack and move to step 5.

  5. The last step is cracking the WPA2 password using reaver.
    reaver -i -b –fail-wait=360
    Because we already get the information from step 3 above, so my command look like this:
    reaver -i wlan0 -b E0:05:C5:5A:26:94 –fail-wait=360

    It took about 4 hours to crack 19 characters WPA2 password (vishnuvalentino.com) from my Kali virtualBox, but it depend with our hardware and wireless card.
    Conclusions:
    1) WPA2 security implemented without using the Wi-Fi Protected Setup (WPS) feature are unaffected by the security vulnerability.
    2) To prevent this attack, just turn off our WPS/QSS feature on our access point. See picture below (I only have the Chinese version)

    Notes : This Tutorial Is for education purposes not for practicing it for some rewards please don’t use it for hacking only practice it for lab or training purposes.We are not responsible for anything regarding with this post!!

Also Visit :

Offer : Bitdefender Internet Security 2015 Free 6 Months Key | Official Offer

Bitdefender Internet Security 2015 Free Serial Number


Now Bitdefender has hosted a promotional offer that allows 6 months free license key for Internet Security suite. Well but this offer could expire anytime so make sure you grab it as soon as possible and as you do that you will receive your license key in your email. Now to get genuine 6 months free serial number for Bitdefender Internet Security 2015 you need to follow below steps :-
  1. Visit Bitdefender PROMO PAGE HERE.
  2. Now you need to enter your Name, Email and the Captcha Code correctly.
  3. Submit it and then you will see a Thank you Message with a note that the key has been sent to your email (As shown in the figure below)
  4. You can download the Internet Security package from Bitdefender Official Link.
  5. Now everything is done, just open your email and you will receive your 6 months internet security 2015 license key. It will be Like this : Z85KU4Q
    This is my Welcome Email Same you will also receive with a new license key.


Now just Enjoy the Offer for Bitdefender Internet Security.
If you face any problem in installing the bitdefender on your system then Comment below.
Here is the system requirements have a look :

  • Minimal system requirements :


  1. OS : Windows XP SP3/Vista/7/8
  2. Memory : 1 GB
  3. Free Space : 600 mb 
  4. CPU : 1.6 Ghz +
Beginners  Guide :
1   How do I install?
 
  First, please download and save the product from the link below: 
 
http://download.bitdefender.com/windows/installer/en/bitdefender_isecurity.exe 
 
Now simply run the installation file. This usually takes only a few minutes. 
 
 

 
2   How do I activate?
 
  During installation, you will be asked for your license key. Simply insert the 7-character code provided earlier in this email. To finalize the activation, log in to your free MyBitdefender account, during the Getting Started stage.
 

 
3   What is MyBitdefender?
 
  Meet your new security dashboard (my.bitdefender.com), an essential part of your online security, accessible anytime, anywhere, from any internet-connected device. We strongly encourage you to use it to: 
 

    Protect yourself on Facebook with Bitdefender Safego™
 
    Remotely manage the security of your devices
 
    Watch over your kids in the online world with Parental Control.
 

So now Just Enjoy and Like us on facebook to stay updated : Click here

Tutorial : How To Hack WPA2 Wifi Password With Windows XP/7/8 In 10 Simple Steps | Hacking Guide

Everyone wants to save his money nowadays – Right??
Thus ,Peoples are looking forward for tricks or hacks such as wifi hacking or isp hacking.People started thinking different and wants to try every possible hacks not only for some free stuffs (Internet) but also for their passion or knowledge.
We not only post games ,software but also gives you all possible hacks and tricks for almost every categories. Have a look to our other hacks :- Click here

How It Works :-
First of all you must know the basics of this hack.It works on Windows with the help of two softwares – CommView and Elcomsoft Wireless Security Auditor .Commview itself is not a hacking software but helps us to retrieve some impotent informations for your host wifi such as Node Reassoication which are important to hack the wifi.
Elcomsoft Wireless Security Auditor is the master-stroke in this hack because it will help us to Crack the password for your host’s wifi. Its much similar like Elcomsoft’s Rar password unlocker .In the same way it makes a attach for the password to crack .Therefore, If the password of your Host’s wifi is typical then it takes more time like a blend of alphabets and numbers ,etc .If it just contains only numbers or just alphabets then it will be cracked soon.
So We Go here -:

Today Our A2Y Team is going to show you the Best tutorial ever -:

How to a crack a Wp2-psk password with windows :
Softwares Required :
1. CommView for Wifi (Download)
2. Elcomsoft Wireless Security Auditor Full Version (Download)
Here i am connected with my own wifi network Virusfound and want to hack the password of Ultimate that is secured with Wpa2-psk encryption.

Firstly , you need to be capture the Wpa2, four-way handsake with CommView.
1) Open commView and click on the Start option

2) Then click on the capture option to start the capture


3)  Now you can see all available AP .Click on the Tools > Select the Node Reassoication option ( if Node Rassociation is not works , then use WiFi Alfa card )

4) Now select your target AP in the Send a deauthentication request from this AP option. it will show you all available client option.

5) Now click on the Send Now option to send the packet for 4-way authentication. Wait for some time so it will capture the packet.

6) Now click on the Save option and choose your file format Commview Capture Files (*.ncf)

Now the work of CommView is Done !!
7) Now open Elcomsoft Wireless Security Auditor to crack your wifi password. Click on the Import Data tab > select the Import CommViewLog option.

8) Now it will show you information about AP and Multiple Handshake selection information. Click on OK.

9) Now click on the Start attack option and select the Dictionary Attack option. However you have other attack options are also available.

10) Now the boring part had begin. You have to wait for some minutes it can take time based upon the password’s security level Or How typical the password is.When it is Completed it will show you the password.

In this hack The Password for my Host’s Wifi (Ultimate) is 12344321 and it has taken about 6 minutes to crack !!

I Hope that it helps you in cracking your host’s password .If yes then please share this hack with your friends and keep visiting for for more hacks !!

Hope That It is helpfull to you !!
If yes then Share This with your friends !!
Share Our Official Button :-

Preview :

——————-———————————————————————————–

Please like us on Facebook
Comments are most Welcomed

Tutorial : How To Take Screenshots In Android Devices Without Any Application

Today Android is very popular now everyone uses it and he/she is familiar with it.
Many asked me on facebook that how to take Screenshots in Android ??
Its Very easy guys, but the process isn’t the same for every device.
Before you learn how to take a screenshot you should check which version of Android your smartphone or tablet you are running.If you have a relatively modern smartphone (post-2011), such as a Samsung Galaxy S3/S4/S5, HTC One, Sony Xperia Z/Z1/Z2 or Nexus 4/5, then you should be running at least Android HoneyComb, Ice Cream Sandwich, Jelly Bean or KitKat, which makes taking a screenshot a doddle.


Process for Taking Screenshot On You Android :

Method 1 :


The first and easiest way to take a screenshot on Android 4.0 and above is to simply press and hold down your android phone’s Power and Volume Down Button at the same time for 1 to 2 seconds. You should then hear a shutter noise and the screen will flash; there will also be a screenshot notification in the drop-down notification bar from which you can access your screenshot.


Note: This Method is Working In – Micromax, Some Samsung and Other Phones. Its also allow you to take a screenshot when you playing videos.


Method 2:


The second method is simple, too. This method is working on many samsung android mobiles. Press and hold your android phone’s Home Button and Power Button at the same time for 1 to 2 seconds.

Method 3:


In some phones ‘Take a screenshot’ option is available usually in the Power off menu.

Press and hold the power button for 1- to 2 seconds until the power options screen appears. If the option is available select ‘Take a Screenshot’. Don’t worry, it will take a screenshot of whatever is behind this menu.

Method 4:


If above methods are not works for you then use this methods. Press and hold your android phone’s Home Button and Back Button at the same time for 1 to 2 seconds. Or, Press and hold your android phone’s Power Button and Home Button at the same time.


Hope That It is helpfull to you !!
If yes then Share This with your friends !!
Share Our Official Bu

Preview :

Coupon : Paytm Diwali Offers Big Cashbacks on Recharges | Official Offer For Diwali

Game Of Ten!

Rs. 10 Cashback on Recharges of Rs. 30 or more
Use promocode CB50
Code can be used 5 times
Recharge Now
T & Cs Apply*

Super 25

25% Cashback on your Recharges
Use promocode C100
Code can be used 4 times
Recharge Now
T & Cs Apply*

Crackelicious DTH Offer

Rs. 120 Cashback on DTH Recharge of Rs. 500
Use promocode DTH120
Code can be used 1 times
Recharge Now
T & Cs Apply*

Diwali Mania

Rs. 20 Cashback on Recharges & Bill Payments of Rs. 50 & more.
Use promocode DIWALI100
Code can be used 5 times
Recharge Now
T & Cs Apply*

Limited Period Offer Avail it Now !!

Earn : Get Free 50 Bitcoins by just Registering | Earn more Coins by referring your friends

Visit Website : Click here

Hello Everyone,
Today we are going to share an earning trick ,its very simple and easy with no Conditions. I hope you will like it.

Main Objectives : 

  1. It’s fully official Method so do’t need to think more.
  2. Xapo is an online company that allows you to even more secure your bitcoins.They also provides a free of cost debit card like that of payoneer.
  3. For Promotions they are giving 50 bits free to each of the new users and they can earn extra 50 bits per their referrer.
  4. You can convert the Xapo Credits Into any Currency (USD ,INR) or in Bitcoins and transfer it also.
Visit Website : Click here

What is Bitcoins??
It is a digital currency or you can say virtual currency which value is more than dollar in 1 bit coin you Get 370 $ USD approx. And in INR 1 bit = 24,000+ Rupees.So it’s each cent value is very valuable. From bitcoin you can buy any online products as normal you buy with Rs or dollar. 

 Visit Website : Click here

Follow these Simple Steps :

1- First Go To this Link Earn Bitcoins (mandatory step ! ).
2- Now Create your Account with your email.

3- Open your mail id and confirm your account by verification link.
4- After Confirming come back to Xapo and you can now see 50 bits In your Account In USD It is about 0.02 USD.
5-From Earn More Section invite Your friend and earn 50 bits per your Reffered User.

Visit Website : Click here

This site offer you a free debit card also. So you can use this debit card in any atm just like that of payoneer Card ,But for receiving atm card you must Required amount.


I hope this is helpfull .If it is then Plz share it and subscribe to our Newsletter.


Email Newsletter
Subscribe to our newsletter to get the latest tricks to your inbox. 😉

Your email is safe with us !

Download : SONY Sound Forge Pro 11.0 Advanced Audio Waveform Editor Full Version With Keygen


Sony Sound Forge is a digital audio editing suite by Sony Creative Software which is aimed at the professional and semi-professional markets. A limited version sold as Sound Forge Audio Studio provides an inexpensive entry-level digital audio editor; it was formerly known as Sonic Foundry’s Sound Forge LE.Its the best audio editor software in the world.

Developer: Sony Creative Software

Features Of This Software:

  • Real-time sample level wave editor
  • Stereo and Multichannel Recording
  • High resolution audio support : 24-Bit, 32-Bit, 64-bit (IEEE float) 192 kHz
  • Video support including AVI, WMV, and MPEG-1 and MPEG-2 (both PAL and NTSC) for use in frame by frame synchronisation of audio and video
  • Support for a wide variety of file formats
  • DirectX and VST plugin support. Version 9 includes a vinyl restoration plug-in and Mastering Effects Bundle, powered by IZotope.
  • Floating Plug-in Chain window for non-destructive effects processing
  • CD Architect 5.2 software which allows Disk-At-Once (DAO) CD burning.
  • Batch conversion functionality
  • Spectrum analysis tools
  • White, pink, brown and filtered noise generators
  • DTMF/MF tone synthesis
  • External monitor support for DV and FireWire (IEEE 1394) devices
Software Information:
File size: 162 MB
Requirements: Windows Vista® (SP2 or later), Windows® 7, or Windows® 8
Languages: English
License: Proprietary (With Full Version Cracked)
Author: Sony Creative Software

System Requirements:
  • Windows Vista® (SP2 or later), Windows® 7, or Windows® 8 operating system
  • 1 GHz processor
  • 500 MB hard-disk space for program installation
  • 512 MB RAM
  • Microsoft DirectX® 9.0c or later
  • Microsoft .NET Framework 2.0 (included on application disc)

Download:


Full Software Link : Server 1 | Server 2 [168.20 MB]
Only Crack Link   : Server 1 | Server 2 [4.30 MB]

How To Download :

1. Click on the Download button above.

2. Wait for 6sec and Skip the Ads

3. Now pCloud User-interface Download page will Open

4. Download your file in parts or Download it All Direct.
    Can’t Skip Ad Try Server 2 [Without ads]


———————————————————————————————————————————————————
Like Us On Facebook For Stay Updated – Page Link
——————————————————————————————————————————————————–

Android : Opera Mini 7.5 Mod Handler GUI for Android Full Download | Direct Links


Now These Days Many Tricks are in the Run ,Everyone wants to use Free Internet through VPN Or Proxy Both in PC And Mobile. So, In order to use free internet on mobile we must have some handler for it. This is a Working Opera Mini Handler Software. Enjoy Free Internet with This Software.

Download Opera Mini 7.5 Handler :
Note: You Need a Working Proxy Or, Front Query Trick To Use This Software For Free Internet.

———————————————————————————————————————————————————
Like Us On Facebook For Stay Updated – Page Link
———————————————————————————————————————————————————

Download : Internet Download Manager (IDM) v6.21 Build 11 Final – Full Version | Latest Crack

Internet Download Manager (IDM) is a tool to increase download speeds by up to 5 times, resume and schedule downloads. Comprehensive error recovery and resume capability will restart broken or interrupted downloads due to lost connections, network problems, computer shutdowns, or unexpected power outages.

Developer: Tonec Inc.

Features Of This Software:
Resume and schedule downloads
Resume capability
Error Recovery
Proxy Server Support
FTP and HTTP Protocol Support
MP3 audio and MPEG video content processing
Multilingual support

What’s new in version 6.21 Build 11 Final:
 Improved IDM download engine
 Improved video recognition in Google Chrome
 Fixed bugs.

Software Information:

File size: 10 MB

Requirements: Windows (All Versions)

Languages: Multiple languages

License: Shareware (With Full Version Cracked)

Date Released: October 01, 2014



Download :