Category Archives: Wifi hacking

Tutorial : Hack WPA2 Wifi Through Linux Kali In 5 Simple Steps | Can Be Hacked With Virtual Box


Wi-Fi Protected Access (WPA) and Wi-Fi Protected Access II (WPA2) are two security protocols and security certification programs developed by the Wi-Fi Alliance to secure wireless computer networks. The Alliance defined these in response to serious weaknesses researchers had found in the previous system, WEP (Wired Equivalent Privacy).

A flaw in a feature added to Wi-Fi, called Wi-Fi Protected Setup (WPS), allows WPA and WPA2 security to be bypassed and effectively broken in many situations. Many access point they have a Wifi Protected Setup enabled by default (even after we hard reset the access point).

Requirements :

  1. Wireless card (support promiscuous mode) – In this tutorial I use ALFA AWUS036H from Amazon.inA flaw in a feature added to Wi-Fi, called Wi-Fi Protected Setup (WPS), allows WPA and WPA2 security to be bypassed and effectively broken in many situations. Many access point they have a Wifi Protected Setup enabled by default (even after we hard reset the access point).
  2. Access point with WPA2 and WPS enables.
  3. A linux Kali OS Installed in your PC. If you don’t have it download it now : http://abhi2you.blogspot.com/2014/10/download-kali-linux-operating-system-32.html
    Don’t know how to install it??? Visit this link –
    http://abhi2you.blogspot.com/2014/10/tutorial-how-to-dual-boot-kali-linux.html
    Want to use Virtual Box – Download it Now : Click here

Steps to Crack WPA2 Password With Linux Kali :

  1. Open Linux terminal (CTRL+ALT+T) and type airmon-ng


  2. The next step we need to stop our wireless monitor mode by running airmon-ng stop wlan0 .


  3. Now we ready to capture the wireless traffic around us. By running airodump-ng wlan0 our wireless interface will start capturing the data.

    From the picture above, we can see many available access point with all the information. In the green box is our victim access point which is my own access point :-)

    Information:
    BSSID (Basic Service Set Identification): the MAC address of access point
    PWR: Signal level reported by the card.
    MB: Maximum speed supported by the AP. If MB = 11, it’s 802.11b, if MB = 22 it’s 802.11b+ and higher rates are 802.11g.
    ENC: Encryption algorithm in use.
    CIPHER: The cipher detected. TKIP is typically used with WPA and CCMP is typically used with WPA2.
    Beacons: Number of announcements packets sent by the AP
    #Data: Number of captured data packets (if WEP, unique IV count), including data broadcast packets.
    #/s: Number of data packets per second measure over the last 10 seconds.
    CH: Channel number (taken from beacon packets).
    AUTH: The authentication protocol used.
    ESSID: Shows the wireless network name. The so-called “SSID”, which can be empty if SSID hiding is activated.

  4. From the step 3 above, we can find access point with encryption algorithm WPA2 and note the AP channel number. Now we will find out whether target AP has WPS enabled or not.
    wash -i wlan0 -c 8 -C -s

    If the WPS Locked status is No, then we ready to crack and move to step 5.

  5. The last step is cracking the WPA2 password using reaver.
    reaver -i -b –fail-wait=360
    Because we already get the information from step 3 above, so my command look like this:
    reaver -i wlan0 -b E0:05:C5:5A:26:94 –fail-wait=360

    It took about 4 hours to crack 19 characters WPA2 password (vishnuvalentino.com) from my Kali virtualBox, but it depend with our hardware and wireless card.
    Conclusions:
    1) WPA2 security implemented without using the Wi-Fi Protected Setup (WPS) feature are unaffected by the security vulnerability.
    2) To prevent this attack, just turn off our WPS/QSS feature on our access point. See picture below (I only have the Chinese version)

    Notes : This Tutorial Is for education purposes not for practicing it for some rewards please don’t use it for hacking only practice it for lab or training purposes.We are not responsible for anything regarding with this post!!

Also Visit :

Download : Elcomsoft Wireless Security Auditor Professional 5.1.271 Full Version With Latest Crack [18 MB]


Features and Benefits :
-Determine how secure your wireless network is
-Test the strength of WPA/WPA2-PSK passwords protecting your wireless network
-Save time with patent-pending GPU acceleration technology when one or more compatible NVIDIA or ATI video cards are present
-Run advanced dictionary attacks with highly configurable variations
-Perform attacks from inside or outside of your network
-How Secure Is Your Wireless Network?

A single weak link poses a valid security threat to the entire corporate network. Wireless (Wi-Fi) networks can provide sufficient security if configured properly and accompanied by an adequate password policy. Elcomsoft Wireless Security Auditor exposes security problems in your wireless network to allow network administrators taking appropriate measures and adopting a proper password policy.

Wireless Network Security Audit :
Elcomsoft Wireless Security Auditor examines the security of your wireless network by attempting to break into the network from outside or inside. Elcomsoft Wireless Security Auditor works completely in off-line, undetectable by the Wi-Fi network being probed, by analyzing a dump of network communications in order to attempt to retrieve the original WPA/WPA2-PSK passwords in plain text.

Elcomsoft Wireless Security Auditor :
allows carrying out a password audit within a limited timeframe. Representing state-of-the-art in password recovery, Elcomsoft Wireless Security Auditor is one of the fastest and most advanced tools for recovering Wi-Fi passwords. If Elcomsoft Wireless Security Auditor fails to recover a Wi-Fi password within a reasonable time, the entire wireless network can be considered secure.

GPU Acceleration :
ElcomSoft has pioneered many software innovations that have made it easier to recover passwords protecting various types of resources. For the first time in the industry, the company’s patent-pending GPU acceleration makes its way into Wi-Fi password recovery, reducing the time required to recover Wi-Fi passwords up to a hundred times. Supporting up to four NVIDIA boards such as GeForce 8, 9, and 200, as well as ATI video cards such as RADEON HD 3000 Series and up, Elcomsoft Wireless Security Auditor allows building servers with supercomputer performance at a fraction of the price.

Types of Attacks :
Elcomsoft Wireless Security Auditor performs an advanced dictionary search attack in order to expose weak passwords consisting of words and phrases in spoken languages. Allowing highly customizable mutations of ordinary dictionary words, Elcomsoft Wireless Security Auditor performs hundreds of mutations to each word in order to ensure the widest coverage.

Installation :
Step 1: Unpack zip archive
Step 2: Run the setup (ewsa_setup_en.v5.1.271_14-1-2013.msi)
Step 3: Replace the “EWSA.exe” file on the installed folder with my cracked version.
Step 4: Run the Application.
Step 5: Now, you have a fully registered Elcomsoft.Wireless.Security.Auditor.v5.1.271
Enjoy!!

Download :

Server 1 | Server 2


Server 1 is Recommended !!

How To Download This Game :
1. Click on the Download Link above.
2. Wait for 6sec and Skip the Ads.
3. Now pCloud User-interface Download page will Open.
4. Download your file in parts or Download it All Direct.

brought to you by

—————————————————————————————————————————————————–
Like Us On Facebook For Stay Updated – Page Link
Having Problem Comment Below !!

Tutorial : How To Hack WPA2 Wifi Password With Windows XP/7/8 In 10 Simple Steps | Hacking Guide

Everyone wants to save his money nowadays – Right??
Thus ,Peoples are looking forward for tricks or hacks such as wifi hacking or isp hacking.People started thinking different and wants to try every possible hacks not only for some free stuffs (Internet) but also for their passion or knowledge.
We not only post games ,software but also gives you all possible hacks and tricks for almost every categories. Have a look to our other hacks :- Click here

How It Works :-
First of all you must know the basics of this hack.It works on Windows with the help of two softwares – CommView and Elcomsoft Wireless Security Auditor .Commview itself is not a hacking software but helps us to retrieve some impotent informations for your host wifi such as Node Reassoication which are important to hack the wifi.
Elcomsoft Wireless Security Auditor is the master-stroke in this hack because it will help us to Crack the password for your host’s wifi. Its much similar like Elcomsoft’s Rar password unlocker .In the same way it makes a attach for the password to crack .Therefore, If the password of your Host’s wifi is typical then it takes more time like a blend of alphabets and numbers ,etc .If it just contains only numbers or just alphabets then it will be cracked soon.
So We Go here -:

Today Our A2Y Team is going to show you the Best tutorial ever -:

How to a crack a Wp2-psk password with windows :
Softwares Required :
1. CommView for Wifi (Download)
2. Elcomsoft Wireless Security Auditor Full Version (Download)
Here i am connected with my own wifi network Virusfound and want to hack the password of Ultimate that is secured with Wpa2-psk encryption.

Firstly , you need to be capture the Wpa2, four-way handsake with CommView.
1) Open commView and click on the Start option

2) Then click on the capture option to start the capture


3)  Now you can see all available AP .Click on the Tools > Select the Node Reassoication option ( if Node Rassociation is not works , then use WiFi Alfa card )

4) Now select your target AP in the Send a deauthentication request from this AP option. it will show you all available client option.

5) Now click on the Send Now option to send the packet for 4-way authentication. Wait for some time so it will capture the packet.

6) Now click on the Save option and choose your file format Commview Capture Files (*.ncf)

Now the work of CommView is Done !!
7) Now open Elcomsoft Wireless Security Auditor to crack your wifi password. Click on the Import Data tab > select the Import CommViewLog option.

8) Now it will show you information about AP and Multiple Handshake selection information. Click on OK.

9) Now click on the Start attack option and select the Dictionary Attack option. However you have other attack options are also available.

10) Now the boring part had begin. You have to wait for some minutes it can take time based upon the password’s security level Or How typical the password is.When it is Completed it will show you the password.

In this hack The Password for my Host’s Wifi (Ultimate) is 12344321 and it has taken about 6 minutes to crack !!

I Hope that it helps you in cracking your host’s password .If yes then please share this hack with your friends and keep visiting for for more hacks !!

Hope That It is helpfull to you !!
If yes then Share This with your friends !!
Share Our Official Button :-

Preview :

——————-———————————————————————————–

Please like us on Facebook
Comments are most Welcomed